Into the Woods
KD FLOORING

Into the Woods

2021.05.24

KD FLOORING Pros and Cons

KD FLOORING Pros and Cons(Image)
Wood flooring has silently invaded into our most intimate place – home. When it comes to wood flooring selection, customers tend to put their emphasis on texture and the origin of wood plus the process of treatment are often neglected. Thus, Keding Enterprises has devoted to launch engineered hand scraped wood flooring and at the same time provide transparent purchase information, enabling our customers to enjoy a secure and satisfactory product.
Testing Standard
Testing item
Standard
Wualification
KD Flooring
Commerciallyavailable composite wood flooring
Flammability test
CNS 7614
Length of carbonization≦ 5cm; No remaining flame; 1 minute after, there will be no afterglow
Grade1
Length ofcarbonization >5cm
Adhesion
CNS 10757
10 points(no delaminating)
10 points
Seriouslydelaminating
Alkali Resistance
CNS 10757
Unchanged(Qualified)
Normal
Fading, and flaking paint
Acid Resistance
CNS 10757
Unchanged(Qualified)
Normal
Fading, and flaking paint
Stain Resistance
CNS 10757
Add coffee and ethanol to the sample and let it stand for 16 to 24 hours without any change
Unchanged
Difficult to remove atains
Moisture content
GB-T 18103-2013
≦ 5~14%
8.6%
5~25%
Tongue-and-groove
notch
CNS 11342
No>1mm gap
No>1mm gap;
Accessibility
Rough; 3~8mm gap
Soakingdelaminating
test
CNS 11342
Remaining length of laminating> 2/3
No delaminating
Length of delaminating >1/3
Height difference
between joints
CNS 11342
≦ 0.3mm
0.2mm
0.3~1mm
Abrasion test
CNS 11342
The base material does not reveal;Sand paper with a load of 1000 grams and 100 rotations
No significant change
Base material reveal. Over 0.15g abrasion loss for each 100 rotations
Flexure property
CNS 11342
The difference between the two deflections ≦ 3.5mm
Qualified (1.2mm)
5~15mm
Thickness swellingrate due to water absorption
CNS 11342
Thickness swellingrate due to water absorption ≦20%
 2%
20~40%
Emission of
formaldehyde
CNS 11342
≦0.05 mg/L
Undetected
1.5~20 mg/L
Heavy metals
Green BuildingMaterial testing method
T-Ag <0.05
mg/LT-As  <0.3
mg/LT-Cd <0.3
mg/LCr+6 <1.5
mg/LT-Cu <0.15
mg/LT-Hg <0.005
mg/LT-Pb  <0.3 mg/L
Qualified
Contain toxicchemicals
like Ag、Pb、Cd
Toluene and EthylbenzeneGreen BuildingMaterial
testing method
VOCemission standard: E2UndetectedTVOC 0.2~20 mg/m2.
hrFormaldehyde  0.1~10 mg/m2.hr
Bend, Warp and TwistCNS 11342Thord height of bend for composite wood flooring should be less than 1mm in elevated floors, and less than 0.5mm for floating floors.Qualified
(0.4mm)
0.5mm-2mm

Manufacturing Process
KD Wood flooringCommercially available composite wood flooring
Size
made of golden ratio, creating unbelievable visual esthetics.
Either too small to be great, or too large  to reach delicacy.
Deformation
Take the “Prestressed Concrete” measure, hard to deform.
Without any treatments, easy to deform.
Surface Materials Treatment
Soaked in the water of 90℃~95℃in a vacuum for 7 days to create clear and distinguished wood grains.
Made of poor quality materials, knots are perceivable but the wood grains are unperceivable.

The Leading Brand of Healthy and Eco-Friendly Materials

Back to List
BACK TO TOP
CONTACT